Setting Up a New Shower Unit
An effective shower setup requires mindful planning and a lot of work. Most of the times, you will require to do three types of jobs: framing walls, installing the plumbing, and finishing walls.
Preparation
Firstly, you need to decide on the type of shower that you wish to install. It is important to ascertain whether the selected shower can managing certain systems and can regulate a safe level of water through the boiler. Many shower systems nowadays are designed to be versatile to different water pressures (such as stored hot water and cold mains).
It is also essential to take into account the water pressure and the planning of the piping and drain for the shower
Different Kinds of Shower Units
Push-on Mixer: The pipe and spray parts of the push-on mixer shower system can be linked to the bath tap based on your requirement, and the water temperature can be adjusted through the taps. Push-on mixers are low-cost and exceptionally basic to set up. However, although the hose connection is easy, it is quickly dislodged. Additionally, it is troublesome to adjust the temperature.
Bath/ Shower Mixer: The hose and spray of this type of shower are combined with a bath mixer tap, and the temperature can be adjusted through the bath taps. It is a really cheap option and no additional plumbing is included. However, the bath/shower mixers likewise suffer from inconvenient temperature control choices.
Manual Mixer: The tube and spray of a manual mixer shower unit are a part of the wall system and the hot and cold water supplies are linked to a single valve The temperature level and pressure of the water are managed through either one or a variety of knobs (in more pricey showers). Although temperature level control is much easier in manual mixer types, they are more expensive than the formerly mentioned mixers. They likewise require additional pipes of hot and cold supply of water pipes.
Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall system and the cold and hot water supplies are connected to a single valve here too. It is complete with an integrated stabiliser to self-adjust the water temperature level and to avoid it from ending up being too hot. Among the greatest advantages of a thermostatic mixer shower type consists of hassle-free temperature level control. Nevertheless, it is the most costly of the different mixer choices.
Power Shower: A power shower is a single system containing an effective electric pump that is capable of modifying both the water pressure and temperature. This type of shower can be fitted if there is supply of water from a cold water tank and a warm water cylinder. A power shower makes the change of both pressure and temperature level easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a combination boiler under mains pressure.
Electric Shower: An electrical shower is plumbed into a mains cold water supply and it warms the water electrically. It is essential to keep in mind that for this shower type to be set up, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature and pressure to be changed through a knob. Models with temperature stabilisers are much better as they remain unaffected by other taps in other places in use within the home. A significant disadvantage of electrical showers is that the control knob just enables the option of high temperatures at less pressure, or lower temperatures at a greater pressure. This is problematic in the winter when the spray is frequently weak and the mains water is colder. Nevertheless, this issue is taken on in some models which are available with a winter/summer setting.
Method
Depending on the type of shower you want to set up, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it needs to have a check valve.
Before starting, it is a good idea to mark the positions of the shower head and control, and to prepare the pipe-work involved. Additionally, the drain system to get rid of the waste water will need to be prepared. Both positions of the cable television path and the shower switch will likewise require to be thought about if an instant or electric shower system is being installed.
Use the guideline https://filedn.com/lanGizbHovxJhfDj94DVuNk/plumber-adelaide/plumber-adelaide.html guide provided with the shower system to fit the shower control.
Before fitting the pipelines that will supply the water to the shower system, it is important to cut off the water system. In order to safeguard the pipelines, they should be offered a water resistant covering and also fitted with separating valves. The pipelines can then be buried into the wall and plastered over to neaten the total look.
Fit the base tray, shower head, and fittings.
Connect the primary shower control to the pipelines that will be supplying the water (This might need a female screw thread adapter).
Reconnect the supply of water and test the pipelines for any leakages, as some may need tightening.
If you are installing an electrical shower, remember to switch off the electricity supply before making any electrical connections. When these connections have been made (there ought to be assistance within the user's manual), the power supply can be switched back on.
Adjusting Water Pressure to Suit Your Shower
The cold water tank can be raised to a greater height (sometimes as little as 150mm (6inches)) by fitting a strong wooden support underneath it-- possibly made up of struts and blockboards. If you pick this option, the primary and circulation pipelines will likewise have to be raised to meet the new height of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked into the power supply in order to operate.
Piping and Drainage
It is best to utilize 15mm diameter supply pipelines, and make the go to the shower as brief and straight as possible so regarding maintain maximum pressure and reduce heat loss. Furthermore, by reducing making use of elbows for pipeline corners, you can decrease the resistance in the flow of the water system. You can attain this by bending the pipes instead.
Most Common Mistakes
# Breaking or ignoring regional code restrictions.
# Using pipes that are too small.
# Attaching copper to galvanized without utilizing a brass or dielectric fitting between the two.
# Not using tape or pipeline compound at threaded joints.
# Not leveling your fixtures when setting up them.
# Not setting up an air gap filling for fixtures.
# Cutting supply stub outs too short to set up the shutoff valves onto after the ended up wall is in place.
# Not properly lining up tubing into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.)
# When turning the water back on in your house, always run the outside hose valve or flush your toilets to bleed dirt and air from the lines. This particles can trigger problems in your sink faucets and other pipes trim.